LTMG Forklift

Industry News
  •              According to customs data, from January to October 2021, my country's construction machinery import and export trade volume was US$30.388 billion, a year-on-year increase of 52.2%. Among them, the import value was 3.168 billion US dollars, a year-on-year increase of 2.53%; the export value was 2...
    09
    2022-08
  •              The sales data of the main products of construction machinery in 2021 have been released recently. The domestic sales of various excavators decreased by 6.32% year-on-year, and the export sales increased by 97% year-on-year; the domestic sales of various loaders decreased by 0.07%...
    13
    2022-04
  •              From April to July 2022, the selection committee will conduct interviews with the director of "Exploring the Power of Construction Machinery Products" and visit users, etc.The tour of the project is carried out, and the characteristics, technology and brand image of the TOP50 award-winning...
    31
    2022-03
  •              Off-road forklift is a kind of engineering vehicle that can load, unload, stack and carry things safely and efficiently on the slope and uneven ground. Like balanced forklift, it can install fork or replace a variety of equipment to improve the operation efficiency.There are many kinds of stru...
    21
    2022-02
  •              1. Check whether the thermostat is working properly.2. Check whether the shifting work of the transmission is normal.3. Check the tightness of the fan belt.4. Check whether the filter screen at the oil inlet of the diesel tank is blocked or damaged, and clean or replace the filter screen.5. Check an...
    13
    2021-12
  •              A. Check theforklift 1. Before forklift operation, check the appearance and fill in fuel, lubricating oil and cooling water. 2. Check the starting, running and braking performance. 3. Check whether the lighting and audio signals are complete and effective. 4. Check whether the...
    17
    2021-11
  •              (1) When driving, the height from the bottom of the fork to the ground should be kept 300-400mm, and the mast should be tilted backward.(2) Do not raise the fork too high while driving. When entering and leaving the job site or driving, pay attention to the obstacles that are scratched in the sky. W...
    21
    2021-10
  •              Precautions for engine use1.New enginesor after repaired, the diesel engine cannot be operated at full load and high speed from the beginning. It must be run in at low speed and light load for 50 hours,then it can be transferred to normal operation.2.Ensure that the fuel is clean....
    15
    2021-10
  •              Forklift attachments, also known as multiple devices, are the best tools for multi-purpose forklifts. For forklifts based on forks, it is required to easily replace multiple work attachments, so that the forklift can adapt to the needs of a variety of working conditions.In addition to using forklift...
    31
    2021-07
  •              (Image source: "Learning Power" learning platform)Warmly celebrate the 100th anniversary of the founding of the Communist Party of China!...
    01
    2021-07
  •              The tire is one of the most important components of a forklift: it supports the full weight of the vehicle and bears the load of the forklift; it transmits the torsion force of traction and braking to ensure good adhesion between the wheels and the road surface to improve the forklift about dynamic...
    10
    2021-06
  •              Regular forklift maintenance and servicing is imperative to keep machines running correctly. A well-maintained machine will provide you with years of reliable and safe service. A neglected machine will break down more frequently, require replacement sooner and, most importantly, put your operators a...
    16
    2019-12
  •              1. Chinese forklifts are developing rapidly Although domestic forklift production starts later than foreign countries, Western technology is higher than domestic ones, but the product series is relatively comprehensive. Since the 1980s, through the introduction of TCM, Mit...
    21
    2019-10
  •              In 2018, with the joint efforts of the whole industry, China's industrial vehicle industry once again experienced a period of high growth. The sales volume of mobile industrial vehicles was only one step away from the 600,000 mark, and domestic and export doubled a record high.The series of mode...
    18
    2019-02
  •              Electric forklift is economical, environmentally friendly. It won't be emissions, and does not produce noise. In the running process, itdoes not produce carbon monoxide, carbon dioxide, nitrogen oxide or other causes of global warming and air pollution harmful gases.And it has longer...
    30
    2018-08
  •              Forklift is suitable for all industries, but it is very difficult to buy a suitable forklift truck. Such as electric forklift or internal combustion forklift, or even choose a small electric forklift, such as electric stacker, electric pallet? These are puzzles!So how to choose more suitable forklif...
    13
    2017-08
  •              The spring of new year, with the temperature rise and the progress of the project started, forklifts will be a heavy load period after experiencing the winter. In this period, it is necessary to check and maintenance forklifts.Body paintIt is necessary to clean the body regularly after a dry, dusty,...
    03
    2017-03
  •              (A) check the vehicle before driving(1) should check the appearance, filling fuel, lubricating oil and cooling water before the forklift operation .(2) check start, running and braking performance; check whether the lights and sound signals are complete and available .(3) after the forklift operatio...
    13
    2016-08
  •              The forklift's axle housing is firmly fixed on the forklift’s frame. As the driving axle and the frame are rigidly connected, the driving axle undertakes the most weight when forklift handling cargos, andwhen forklift working on uneven road or the unequilibrium of fork’s load ,driving ax...
    15
    2015-10
  •              As the improvement of industrial production automation degree and the expansion of production scale, as well as the production process of material handling costs on the huge impact on profits, prompting enterprises to use more and more large, efficient and automated material handling machinery durni...
    14
    2013-07